Key Features
Standardized symbols
Complete symbols of IEC, NFPA, ISO, PN and other libraries that have been prepared in accordance with both national and international standards. Symbols can be inserted with automatic positioning, line interruptions, automatic numbering and labeling.
Addressing/numbering
Quick addressing of objects and numbering of electrical circuits with automatic control of numbering correctness.
Cable routes/busbars
Designing cable routes with usage of convenient commands for drawing sequences of cable trays, ducts and cable ladders with automatic insertion of appropriate fittings. Cable trays can be drawn automatically along the indicated infoline. Designing busbars installations with the possibility to work in 2D or 3D.
Manufacturer libraries
Complete libraries of leading manufacturers (ABB, EATON, Schneider Electric, SIEMENS, Hager, Lovato Electric, ETI, Legrand, Cablofi, DEHN, Noark Electric, Schrack Technik, F&F, RELPOL, Pulsar and many others).
Modular apparatus
A rich library of general views of modular apparatus, including: protection, control, switching, signaling, measuring, industrial, panel and switchgear apparatus.
Cooperation with DIALux
Possibility to import luminaires from DIALux. During import all luminaires will be replaced with standard CADprofi blocks and information about them (name, type) will be taken from DIALux and replaced with appropriate attributes.
Electrical symbols
Designing on architectural plans, insertion of sockets and connectors, deployment of lighting fixtures, designing linear lighting and power of any energy type. Program also possesses the possibility to configure junction boxes with any configuration of sockets and connectors.
Switchboards
A rich library of general views of modular, meter, multimedia, hermetic, flush-mounted and surface-mounted switchboards (distributors). Flush-mounted, surface-mounted and floor-standing system cabinets with elements of the development system and additional accessories: DIN TH35 mounting rails, busbars, comb channels.
Cooperation with DIALux
Possibility to import luminaires from DIALux. During import all luminaires will be replaced with standard CADprofi blocks and information about them (name, type) will be taken from DIALux and replaced with appropriate attributes.
Key Features
Pipes/ventilation ducts
Drawing of real views of pipes and ventilation ducts with automatic insertion of appropriate fittings with the possibility of their later edition.
Schematic lines
Schematic lines that can also be drawn in bundles. Lines can be given any markings, their type and size. Additional cable routing options allow user to quickly connect objects with other objects or with armature.
Manufacturer libraries
Already prepared elements from the well-known manufacturers, including KSB, Vaillant, Gestra, Wavin, Viessmann, Wilo, Reflex and many more.
Air flow calculations
Calculations of air flow velocity in ventilation ducts.
Smart symbols
Intelligent symbols, that can be automatically inserted into lines, line crossings or at any point. Additional options, that allow for example for simultaneous insertion of multiple symbols , greatly accelerates work.
Hydraulic calculations
Hydraulic calculations, selection of line length and automatic drawing of heating and hot tap water strand diagrams in KaMo/Clage libraries.
Parametrical armature
Parametric armature and other installation objects with automatic insertion into pipelines or ventilation. During the insertion of parametrical objects to the project it is possible to choose standard sizes or self-define and store user own dimensions and types. Program also allows user to import dwg or dxf files that have been downloaded from manufacturers websites.
Predefined diagrams
Predefined parts of diagrams, heating circuits etc. with the possibility to save your own diagrams.
P&ID schemes
Easy edition of P&ID schemes, heating, water and sewage strand diagrams, designing plans, cross-sections and other installation views.
Key Features
Designing stairs
Designing of stairs with the possibility of determining the dimensions and number of treads. Various types of stairs, incl. straight, spiral, L stairs, U stairs, U two-split stairs with a landing, stairs with storage, concrete, cheek stairs, shelf stairs, carpet stairs, stairs elements, from which user can build stairs with any number of treads, are available.
Woodwork
Parametric woodwork (doors, windows, garage doors) with automatic detection of the wall thickness. Plan, cross-section, and elevation views are available. For parametrical objects user can specify any dimensions and properties.
Dimensioning
Architectural dimensioning that is suited for construction projects. Program allows user to change styles and dimension units regardless of which designing unit was used in the drawing (e.g. dimensioning in cm of drawing that were prepared in mm).
Designing roofs
Insertion of roofs with the possibility of calculating surface slopes, roof angles and its height.
Drawing walls
Drawing of single and multi-layered walls with the ability to define any material and thickness of each wall layer and the function of drawing walls with filled insulation.
Room definitions
Automatic defining and marking of rooms with surface calculation. Configurable room descriptions.
Furniture library
Library of interior design and landscape architecture: furniture, sanitary equipment, electronics and household appliances, plants, vehicles, swimming pools, jacuzzi, saunas and others.
Gutter systems
A rich library of steel, PVC and rectangular gutter systems as well as downpipes with elements of equipment and assembly accessories (hooks, drain funnels, bottoms, elbows, tees, internal/external corners, clamp connectors, spouts, settling tanks).
Emergency routes
Drawing and editing emergency escape routes and plans. Library of symbols, marks and signs from the health and safety, fire protection and public information.
Key Features
Standardized parts
A rich set of parametric standardized parts and fasteners prepared on the basis of national and international standards (e.g. ISO, ANSI, ASME, EN, DIN, PN, IS, JIS, GOST), including bolts, screws, washers, nuts, joints, rivets, studs, openings, rebates, wedges, pivots, pins, bearings, grease nipples, rings and many more.
Heat exchangers
Procedures used for calculating the heat exchangers and different types of tube bundles in heat exchangers.
Marks
System of freely configurable marking welds, tolerance signs, edge, roughness and others. Inserting weld views (V welds, fillet welds) with the possibility of defining user own dimensions.
Shapes and profiles
Steel and aluminium shapes and profiles: L-shapes, C-shapes, T-shapes, flat bars, hollow profiles, rods, pipes and others. In profiles, it is possible to specify the material type (type of steel).
Dynamic scaling
Dynamic scaling of parts when inserting them into drawing or when editing projects. This allows for automatic selection of the size of the element directly in the drawing (e.g. selecting screws with a length matched to the thickness of connected elements).
Pneumatic systems
Convenient design of diagrams and pneumatic systems using smart symbols, lines and editing functions.
Designing apparatus
Elements used for designing apparatus, including flanges and dished ends, steel pipes and fittings (elbows, tees, reducers). It is possible to draw pipelines with automatic insertion of bends and automatic connection of pipes by using a variety of fittings.
Different views
All parts have different views adapted for creating different designs (e.g. front views, side, cross-section etc.). It is also possible to define the style and detail level that allows for insertion of parts with details, axes, hatch etc.
Drawing tools
Additional drawing tools that greatly facilitate the creation of technical drawings (axis, circle axes, center marks, bisectors and others). Function of detecting all circles in the selected block and automatic insertion of circle axes or center marks in them.
AutoTURN 11.0.5
CAD Platform Compatibility (Only 64 bit, except Bentley V8i series):
Autodesk® AutoCAD® 2019 – 2024 (except AutoCAD LT)
Autodesk® Civil 3D® 2019 – 2024 alignments
Bentley® MicroStation® V8i (SS4 and up), CONNECT® (Update 12 and up)
Bentley® MicroStation® 2023 support is available through a patch (Download here)
Bentley® MicroStation® PowerDraft V8i, CONNECT® (Update 12 and up)
Bentley® PowerCivil V8i
Bentley® Power GEOPAK V8i
Bentley® Power InRoads V8i
Bentley® AECOsim Building Designer V8i, CONNECT
Bentley® OpenBuildings Designer CONNECT
Bentley® OpenRoads Designer CONNECT
Bentley® OpenCities Map CONNECT
Bentley® OpenSite Designer CONNECT
Bricsys® BricsCAD® Pro V21 – V24
ZWSOFT® ZWCAD® Pro 2023